UPS – SWE²+ 925VA

  • Battery : 1 Battery System
  • Waveform : Pure SINEWAVE
  • Input AC Range : Wide : 100V~300V AC, Standard : 180V~260V AC
  • Input DC Range : 10.5 ~ 14.2
  • Efficiency (on battery mode) : >80%
  • Protections: Overload : 110%, Short – Circuit : 300%
  • Charger Current All Models : STANDARD: 10A ± 1A, HIGH: 14A ± 1A


MICRO CONTROLLER/DSC BASED INTELLI PURE SINEWAVE UPS SWE² is designed using latest state-of-the-art Technology for Better Performance and High Reliability. The INTELLIPURE SINEWAVE Technology used enhances the life of the battery and minimum effort has to be put for maintenance.

    • Digital Signal Controller (DSC) Based Intelligent Control Design
    • Pure Sine Wave Output
    • PWM Controlled multistage ATM (Automatic Trickle Mode) Charging
    • Display Indications (Status & Fault)
    • Smart Overload Sense and Short Circuit Protection
    • Easily Serviceable
    • Auto Reset Feature
    • Mains Input Voltage Range Selection

Smart Boost function for Low Input Voltage: When the mains voltage is low, the smart boost will correct it back to its normal range without draining the battery.
Smart Buck function for High Input Voltage: When the mains voltage is high, the AVR or smart buck will correct it back to its normal range without draining the battery.
Over Voltage Protection: The UPS will switch to UPS mode & offers power from the battery when the mains voltage is too high.
Over Load/Short Circuit Protection: If the UPS is excessively overloaded in UPS mode or encounters a short circuit, it will go into protection mode. The output will be shutdown in this case.
Battery Deep Discharge/Over Charge Protection: The UPS has in-built electronic protection circuit which protects the batteries from getting deep discharged or over charged.

Technical Specifications
Input Voltage
(Standard Range)
(Narrow Range)
Output Voltage on Mains Mode
Same as Input
Output Voltage on UPS Mode
210V ± 10%
Output frequency on UPS Mode
50 Hz ± 0.1 Hz
Switching from Mains to UPS
and from UPS to Mains
Output Waveform on Mains Mode
Same as Input
Output Waveform on UPS Mode
Battery Charging Current
Constant Charging Approx 10% of The Rated Battery Current in AH
Power Factor Controlled Boost Technology
> 80%
UPS Overload / UPS Short Circuit
110% / 300%
UPS Transfer Time
≤ 15 msec.
Auto Reset Feature